Our site is getting a makeover! Please bear with us whilst we make improvements
We’re getting into the party spirit with this Christmas project and thinking about Christmas entertaining with a pretty table. Learn how to make this DIY Christmas coaster.
To help protect your table and carry your Christmas theme through to the lounge we have created these clever Christmas coasters.
They are incredibly quick to make and so pretty. Furthermore, they’re sure to impress your guests.
(more…)
Here’s how to make a 15 minute napkin with mitered corners. We’re continuing out theme of helping you create a more sustainable Christmas… Fabric napkins are a fabulous step into sustainability & will make your Christmas table look amazing!
With some clever folding, a coordinating runner & some homemade Christmas crackers you will create an incredible focal point for your Christmas feast.
Follow this tutorial & learn how to stitch a mitred corner in just 15 minutes!
And if you just wanna learn how to fold your napkins in to some fancy Christmas trees then scoot down to the bottom of the tutorial for the lowdown…
Boring Legal Bit: If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewed here
We have also published a tutorial on how to make Reusable Christmas Crackers – check that out here
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
1 x 49cm square of quilting cotton (we used fabrics from the Makower Joy collection)
1.5 cm seam allowance throughout, unless directed.
For steps using machine sewing, always backstitch at the start & end unless otherwise stated.
Pre-wash your fabrics
Cut out a 49cm square of your chosen fabric
With the fabric facing wrong side up, turn over 2cm of fabric along each side & press.
Fold the raw edges under to the crease & press again forming a 1cm border around the napkin.
Starting at one corner, open out the 2cm hem on both sides.
Fold over the corner, the creases will have formed a small square. Align the 2 sides of the small square with the two 2cm creases on the underside of the napkin. Finger press along the fold.
Unfold the corner and mark out the fold line
Fold the corner in half bringing the 2 right sides together.
Pin and sew along the marked line.
Trim the seam allowance to 3mm and clip the end.
Turn out the corner, use a turner to shape the point
Repeat steps 3 and 4 on the other corners
Press then sew the border of the napkin with a 1cm seam allowance.
And your napkin is finished!
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Why not get extra creative with your table setting and check out some napkin folding tutorials.
Fold the napkin into quarters
Fold up 1 corner of fabric at a time each one lying 2cm below the previous
Turn the whole thing over
Fold the left most corner up to the right pivoting at bottom centre.
Repeat with the right.
Turn the whole thing over
Rotate the napkin
Fold under one corner at a time to form tiers
Lift up the top layer and form a cone shape
Stand up the tree and you’re done!
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
We hope you enjoyed that tutorial and have fun making it. If you make your own version please tag us @PlushAddict #PAReusableNapkin
We would love to see your creations!
Fancy a more sustainable snap at your festive table this year? This reusable Christmas cracker tutorial (oh yes they did!) will have you repurposing your recycling, reducing your rubbish & reusing resources!
These christmas crackers can be refilled time & time again & stored away for the following year without fear of the snap losing it’s spark!
The core of these reusable crackers is a plastic milk carton & the snap sound comes from a knotted elastic band that pings on a milk bottle top & makes a satisfying SNAP sound! A fantastic re-purpose of your old rubbish… Don’t you agree?
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Boring Legal Bit: If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewed here
1 fat quarter of quilting cotton (Check out our Christmas Fabric here)
1m Ribbon (we used Berisfords Festive Gold Edge Satin Ribbon)
40cm 3mm elastic
1 4pt milk bottle (label removed, bottle washed & dried)
2 milk bottle lids (washed & dried)
2 small elastic bands
Additional resources:
Glue gun & glue sticks
Domestic scissors
1.5 cm seam allowance throughout, unless directed.
For steps using machine sewing, always backstitch at the start & end unless otherwise stated.
Pre-wash your fabrics
From fabric:
Outer cracker barrel 44×18.5cm
Inner cracker barrel 44×16.5cm
For directional pattern fabrics; the shorter measurement spans the circumference of the cracker & the larger spans the length.
From the milk bottle:
1 Outer cracker barrel 9×16.5cm
1 Inner cracker barrel 9×14.5cm
2 Cracker ends 5 x 15.5cm
Cut a slit through the rim in each side of a milk bottle lid.
Slot an elastic band into the slits & tie a knot close to the underside of the lid. Repeat with the other lid.
Using a glue gun form 4 cylinders from the cut plastic. All should be curved along the long edge.
The outer & inner barrels should be glued with a 1cm overlap.
The end barrels need to be formed with the snap at one end, the underside of the lid facing into the cylinder
Fold over the short edges 1.5cm & press.
Open out the pressed edges then pin & sew the long edges right sides together.
Turn half of the outer cracker barrel fabric out the right way to form 2 layers of fabric.
Insert the corresponding plastic cylinder between the 2 fabric layers & guide it down to the fold line.
Insert a snap section, lid end 1st, inside both layers of fabric. Position it just above the barrel section.
Tuck in the pressed seam allowances. Pin & sew around the top of the cracker.
Sew around the top edge of the cracker leaving a 2cm opening for threading.
Thread the elastic through the casing twice to form 2 loops. Tie off the ends of the elastic.
Sew the opening closed.
Guide the cracker snap up to meet the elastic casing.
Tie a bow each and with 30cm of ribbon between the barrel & the snap.
Thread 15cm of ribbon through the loop in the snap elastic and secure in place with a knot.
To set up your cracker, pop your chosen treat/ joke/ quiz question inside the thinner central barrel. Insert the thin barrel into the wider one and your cracker is ready. To activate the snap, each person pulls the ribbon inside the end of the cracker then releases as the cracker is pulled apart.
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Boring Legal Bit: If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewed here
We hope you enjoyed that tutorial and have fun making it. If you make your own version please tag us @PlushAddict #PAReusableChristmasCracker
We would love to see your creations!
