Say cheers at a table filled with gorgeous luxury table place settings this year and have the best dressed table this season! Because we have lots of ideas and inspiration for your Christmas 2021 table decor.
Our fab new table linen kits are available to purchase in both RED & GREY colourways featuring Makower’s Scandi 2021 collection.
In addition, if you purchase one before 18th July 2021 you’ll save 10% AND gain access to our 3 FREE Christmas projects!
The kit has been designed with the busy Seam-Star in mind.
Moreover, not only is this a simple project, each element comes together FAST as well! For this reason, we reckon you can sew the whole kit and make a luxury table place settings in around 4 hours! (more…)
Here’s how to make a 15 minute napkin with mitered corners. We’re continuing out theme of helping you create a more sustainable Christmas… Fabric napkins are a fabulous step into sustainability & will make your Christmas table look amazing!
With some clever folding, a coordinating runner & some homemade Christmas crackers you will create an incredible focal point for your Christmas feast.
Follow this tutorial & learn how to stitch a mitred corner in just 15 minutes!
And if you just wanna learn how tofold your napkinsin to some fancy Christmas trees then scoot down to the bottom of the tutorial for the lowdown…
Boring Legal Bit:If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewedhere
1.5 cm seam allowance throughout, unless directed.
For steps using machine sewing, always backstitch at the start & end unless otherwise stated.
Pre-wash your fabrics
1. Cut your fabric
Cut out a 49cm square of your chosen fabric
2. Press the edges
With the fabric facing wrong side up, turn over 2cm of fabric along each side & press.
Fold the raw edges under to the crease & press again forming a 1cm border around the napkin.
3. Mitre The Corners
Starting at one corner, open out the 2cm hem on both sides.
Fold over the corner, the creases will have formed a small square. Align the 2 sides of the small square with the two 2cm creases on the underside of the napkin. Finger press along the fold.
Unfold the corner and mark out the fold line
Fold the corner in half bringing the 2 right sides together.
Pin and sew along the marked line.
Trim the seam allowance to 3mm and clip the end.
Turn out the corner, use a turner to shape the point
4. Repeat
Repeat steps 3 and 4 on the other corners
Press then sew the border of the napkin with a 1cm seam allowance.
And your napkin is finished!
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Fancy a more sustainable snap at your festive table this year? This reusable Christmas cracker tutorial (oh yes they did!) will have you repurposing your recycling, reducing your rubbish & reusing resources!
These christmas crackers can be refilled time & time again & stored away for the following year without fear of the snap losing it’s spark!
The core of these reusable crackers is a plastic milk carton & the snap sound comes from a knotted elastic band that pings on a milk bottle top & makes a satisfying SNAP sound! A fantastic re-purpose of your old rubbish… Don’t you agree?
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Boring Legal Bit:If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewedhere
Reusable Christmas Cracker Tutorial
Skill Level: Beginner
To make ONE reusable Christmas cracker you will need:
1.5 cm seam allowance throughout, unless directed.
For steps using machine sewing, always backstitch at the start & end unless otherwise stated.
Pre-wash your fabrics
1. Cut your materials
From fabric:
Outer cracker barrel 44×18.5cm
Inner cracker barrel 44×16.5cm
For directional pattern fabrics; the shorter measurement spans the circumference of the cracker & the larger spans the length.
From the milk bottle:
1 Outer cracker barrel 9×16.5cm
1 Inner cracker barrel 9×14.5cm
2 Cracker ends 5 x 15.5cm
2. Make the snap
Cut a slit through the rim in each side of a milk bottle lid.
Slot an elastic band into the slits & tie a knot close to the underside of the lid. Repeat with the other lid.
3. Form the barrels
Using a glue gun form 4 cylinders from the cut plastic. All should be curved along the long edge.
The outer & inner barrels should be glued with a 1cm overlap.
The end barrels need to be formed with the snap at one end, the underside of the lid facing into the cylinder
4. Prepare the fabric
Fold over the short edges 1.5cm & press.
Open out the pressed edges then pin & sew the long edges right sides together.
5. Form the cracker
Turn half of the outer cracker barrel fabric out the right way to form 2 layers of fabric.
Insert the corresponding plastic cylinderbetweenthe 2 fabric layers & guide it down to the fold line.
Insert a snap section, lid end 1st, inside both layers of fabric. Position it just above the barrel section.
6. Elastic casing
Tuck in the pressed seam allowances. Pin & sew around the top of the cracker.
Sew around the top edge of the cracker leaving a 2cm opening for threading.
Thread the elastic through the casing twice to form 2 loops. Tie off the ends of the elastic.
Sew the opening closed.
7. Finishing touches
Guide the cracker snap up to meet the elastic casing.
Tie a bow each and with 30cm of ribbon between the barrel & the snap.
Thread 15cm of ribbon through the loop in the snap elastic and secure in place with a knot.
To set up your cracker, pop your chosen treat/ joke/ quiz question inside the thinner central barrel. Insert the thin barrel into the wider one and your cracker is ready. To activate the snap, each person pulls the ribbon inside the end of the cracker then releases as the cracker is pulled apart.
Want a printable copy of this tutorial? No problem! Request it below & a copy will be sent direct to your in-box
Boring Legal Bit:If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewedhere
We hope you enjoyed that tutorial and have fun making it. If you make your own version please tag us @PlushAddict #PAReusableChristmasCracker
