These cute little fabric trays are a great beginner project. They stitch up quickly and are a very handy cute little item to have dotted around your sewing room. Use them to catch threads or keep your little sewing notions tidy and easy to grab. Perfect as a quick gift, scrap buster and a short satisfying sew…
Aren’t they just the sweetest little things?
You will need:
-
An old pair of jeans
-
1 FQ Quilting cotton
-
Heavy Iron-on Interfacing or a woven interfacing. Vliseline G700 is great for this
-
Temporary fabric marker
-
Thread
3/8″/ 1cm seam allowance throughout, unless directed otherwise.
Step 1:
Decide which sized tray you are going to make. Cut your fabrics as per the the table :
Cut the following based on the table above:
1 x square Denim Outer Fabrics
1 x square Inner quilting cotton
2 x squares Interfacing Squares
Step 2: Iron on interfacing squares to the reverse side of both the denim outer & the quilt cotton fabric inner.
Step 3: With RST pin the outer and inner fabrics together
Step 4: Sew round the edge leaving a turning gap of approx 3-5 inches (depending on which sized tray you are making)
Step 5: Trim the fabric on each corner diagonally to reduce bulk, taking care not to snip through your stitches
Step 6: Turn to the right side making sure your corners are crisp (Use a sturdy pin to dig out the excess fabric in the corners helps here)
Pro Tip: The tool pictured above are Needle Grippers and they are SO helpful for turning out projects
Step 7: Press & pin the turning gap closed.
Step 8: Top Stitch all the way around the edge using a 3mm stitch approximately 1/8″ from the fabric edge , closing the turning gap.
Step 9: On both sides of every corner make a mark with a temporary fabric marker the distance from the corner as listed in the table below
Step 9: Match up the 2 marks on each corner so the lining fabric is touching. Over stitch catching both sides of the tray. Repeat for all 4 corners.
Congratulations! You’re done!
Did this guide help you? If it did I’d appreciate it if you’d leave a comment or a ❤️ on this post to help other people find my work! And if you’d like to hear more from me I’d love it if you would subscribe below… thanks so much!
I’d be thrilled to hear that you appreciate my work! I’d love it if you bought me a coffee to support my work if it has helped you ☕️
Thank you for sharing this tutorial. These trays are so cute with denim and pretty cotton prints. Can you tell me what type of comparable fusible interfacing I would find in the US? Thank you.
Hi Kathleen
You could use the Pellon SF101 Shape-Flex. We’ve got a full range of interfacing options here with Pellon equivalents: https://plushaddict.co.uk/The_Ultimate_At_A_Glance_Vlieseline_Guide_EN_1.pdf
Thanks!