**UPDATE** Thanks for stopping by! I felt this project, first created in 2013, could benefit from an update so I’ve re-designed it and made the peg bag a little more polished. The updated version is still a very speedy sew so don’t fret!
Check out the updated peg bag tutorial here or read on for the original version…
I have no idea why I keep doing laundry-related tutorials seeings as I hate the task so much but it just keeps happening so I’ll roll with it. Inspired by Makower’s new fabric collection which goes by the name of “Wash Day” I’m a complete sucker for anything kitschy and retro so I decided I needed this fabric to cheer me on through the dull laundry days. And this really did only take 20 minutes to put together, hooray!
You will need:
30 cm of the fabric of your choice.
30 cm of PUL which is here. (I suppose the PUL is optional but it gives the bags some structure and will also protect your pegs from rusting should you leave them on the line and they get rained on!) You could use regular fabric for the lining, just be sure to interface it to add some structure.
50cm of bias binding, I used a lace-edged bias binding
A child’s coat hanger (I stole this from my daughter’s wardrobe, it probably came from eBay)
Wonderclips or pins
Odif 505 temporary adhesive spray
Step 1
Lay your coat hanger onto your fabric and leave about a 1 inch allowance on either side of the hanger. Trim your fabric to size.
Step 2
Cut your PUL to the exact same size as the fabric. (I used a pinking blade on my rotary cutter as it gives a much nicer finish to the seams and is really easy to use) and then use some 505 spray to keep the 2 layers together
Step 3
Cut 2 strips of your bias trim to the same length as the short side of the peg bag edge and sew along the 2 short ends
Step 4
Fold over the top of the fabric enough to cover the coat hanger and iron a crease line, and then fold in half down the length of the fabric and mark with a temporary fabric pen. You are marking where you are going to put the buttonhole to make the hole to put the hanger through.
Step 5
Make the buttonhole on your machine and carefully cut down the centre to make a hole
Step 6
With right sides together sew up the 2 sides of the bag. Clip the corners and turn out
Step 7
Turn the right way and place the hanger in place and voila! You are ready to peg, so hop to it!
Did this tutorial help you? If it did I’d appreciate it if you’d leave a comment or a ❤️ on this post to help other people find my work! And if you’d like to hear more from me I’d love it if you would subscribe below… thanks so much!
Stunning. Great pattern and about to order the fabric. Also am in a peg bag swap in August so this one is great.
It’s brilliant fabric for the cause! Glad you approve 🙂
Wonderfully easy to make. Stunning. Very useful basic pattern to dress up or down. Thank you.
Could you use patterned PUL for this, and not need two fabrics? Just trying to be super-cheap!
Absolutely… It doesn’t need to be waterproof to be honest, I just used the PUL to add a stabiliser more than anything and the waterproof was an added bonus. You could use ripstop too which is even cheaper 🙂
Brilliant, thank you!
Great tutorial. My Mum & Grandmothers always made peg bags from my and my sisters’ worn/too small dresses, but the method was pretty similar 🙂
Sorry but I do not seem to find what the measurements of where to fold the hanger part I gather that the bottom part is longer
just tried this as a first project having gotten my firts ever sewing machine at Christmas. I must say it’s perfect to get you started and try a few thins out ! I did the version without the PUL and added a trim i bought from a craft shop for 50 p …what a buzz replacing my old shop bought peg bag with this one right away !
Fantastic news! Glad you had fun
Thank you. Made it today. Was really easy and looks good.
Which way do you put the PUL against the material, smooth to wrong side or right side or fluffy to wrong side or right side? Many thanks.
Step 3 missing?.
All the steps are there, I think the numbering went a little awry. I’ve corrected it. Thanks for spotting it!
What is PUL?
It is just me or is it really a fat quarter – I thought that was nearly square (50cmx55cm?) but the fabric looks much longer than the width. Maybe it’s just the ‘view’ but great pattern which I’m going to try.
Hi Brenda, apologies – a mix up here with the previous response… a fat quarter is half a metre/ yard x half the width of the fabric so for fabrics that are wider (like PUL) you do get a larger fabric pieces if the width id greater that 110cm/ 44″
Excelente y super fácil soy nueva en esto de la costura pero voy a atreverme a hacer este proyecto.
Es sencillamente fabuloso…
Corrección